Subject
Control of the machine-side converter-generator set
General details of the subject
- Mode
- Face-to-face degree course
- Language
- English
Description and contextualization of the subject
In this course the concepts of vector control applied to the control of three types of machines applied to wind generators will be shown.Thus, the models of the induction machines (squirrel cage and DFIG) and the synchronous machine will be shown.
In addition to the models of the machines, the model of the wind turbine and the mechanical system affecting the control system will be shown.
Finally, the control of these machines as wind generators will be carried out starting from the models previously mentioned and adjusting the controllers for a correct operation.
The systems will be implemented using Matlab/Simulink.
In the event that the sanitary conditions prevent the realization of a teaching activity and / or face-to-face evaluation, a non-face-to-face modality will be activated of which the students will be informed promptly.
Teaching staff
Name | Institution | Category | Doctor | Teaching profile | Area | |
---|---|---|---|---|---|---|
CORTAJARENA ECHEVERRIA, JOSE ANTONIO | University of the Basque Country | Profesorado Titular De Universidad | Doctor | Not bilingual | Electronic Technology | josean.cortajarena@ehu.eus |
Competencies
Name | Weight |
---|---|
Students should have updated knowledge about the advanced working techniques and methodologies related to the field of Smartgrids and distributed generation, particularly from the point of view of their control. | 10.0 % |
Establishing dynamic models of the different components of Smartgrids, particularly different Distributed Generation units. | 25.0 % |
Design of control laws locally for the different components of Smartgrids, particularly Distributed Generation units. | 25.0 % |
Evaluating and validating models and drivers of different components of Smartgrids, through simulations and experimental testing, using different computing and prototyping tools. | 20.0 % |
Students should be able to communicate about the projects carried out working in multidisciplinary and multilingual national and international teams of professionals and researchers operating in the field of Smartgrids. | 10.0 % |
Students should be trained to understand and analyse technical documents, standards and scientific articles on the topic of the Master, and to apply them in the creation of work and research related to the field of Smartgrids. | 10.0 % |
Study types
Type | Face-to-face hours | Non face-to-face hours | Total hours |
---|---|---|---|
Lecture-based | 22 | 33 | 55 |
Applied classroom-based groups | 5 | 7.5 | 12.5 |
Applied laboratory-based groups | 4 | 0 | 4 |
Applied computer-based groups | 14 | 27 | 41 |
Training activities
Name | Hours | Percentage of classroom teaching |
---|---|---|
Application Workshops | 4.0 | 100 % |
Exercises | 12.5 | 40 % |
Expositive classes | 22.0 | 100 % |
Solving practical cases | 41.0 | 34 % |
Systematised study | 33.0 | 0 % |
Assessment systems
Name | Minimum weighting | Maximum weighting |
---|---|---|
Oral examination | 10.0 % | 30.0 % |
Practical tasks | 20.0 % | 40.0 % |
Written examination | 40.0 % | 60.0 % |
Ordinary call: orientations and renunciation
CONTINUOUS EVALUATION SYSTEMThe professor will assign a project to the student that will be developed in the laboratory. The elaboration process and the results will be used to evaluate the subject.
An exam will be conducted and averaged with the project. It will be mandatory to get a 4 in the exam to make the average.
FINAL EVALUATION SYSTEM
According to article 8 of the Regulations, regulating the assessment of students in the official degrees, the students shall have the right to be evaluated by means of the FINAL EVALUATION SYSTEM, independently of the fact that has or has not participated in the CONTINUOUS EVALUATION SYSTEM. In order to do so, students must present the following information written to the teacher in charge of the subject the renunciation of the CONTINUOUS EVALUATION within a period of 9 weeks from the beginning of the term. In this case, the student will be assessed with a single final exam, which will include a practical part, which will comprise 100% of the grade. Final grade= 0.85*EX+0.15*PL. In order to pass you must obtain at least 5 points out of 10 in both the written test (EX) and the practical test(PL).
RENUNCIATION
According to article 12 of the Regulations, regulating the assessment of students in the official degrees, in the case of CONTINUOUS EVALUATION, the student may renounce the call for proposals within a period which, as a minimum, will be up to one month before the end of the teaching period of the corresponding subject. This waiver must be submitted in writing to the teacher responsible for the subject. In the case of FINAL EVALUATION, a no presentation to the official examination will result in the automatic waiver of the corresponding call. Renunciation of the call will result in the qualification of not presented.
Extraordinary call: orientations and renunciation
The criteria to pass each activity as the weighting of the grade will be the same as in the ordinary call.RENUNCIATION
A no presentation to the official examination will result in the automatic waiver of the corresponding call. Renunciation of the call will result in the qualification of not presented.
Temary
COURSE CONTENTS, THEORETICAL & APPLIEDTopic 1. Vector transformations
Topic 2. Aerodynamic and MPPT model
Topic 3. Space vector modulation
Topic 4. Wind turbine system configurations
Topic 5. Model of the asynchronous machine
Topic 6. Permanent magnet synchronous machine
Topic 7. Double fed induction generator
Topic 8. PID Tuning
Bibliography
Compulsory materials
Documentación de la página web de la asignatura. Accesible en: http://moodle.ehu.es/moodleBasic bibliography
A. Tapia, G. Tapia, J. X. Ostolaza, and J.R. Sáenz, Modeling and control of a wind turbine driven doubly fed induction generator, IEEE Trans. Energy Convers., vol. 12, no. 2, pp. 194,204, Jun. 2003.P. Vas, Sensorless Vector and Direct Torque Control. New York: Oxford Univ. Press, 1998.
G. Tapia, A. Tapia, and J. X. Ostolaza, Two alternative modeling approaches for the evaluation of wind farm active and reactive power performances, IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 909¿920, Dec. 2006.
G. Tapia, G. Santamaría, M. Telleria, and A. Susperregui, Methodology for smooth connection of doubly fed induction generators to the grid, IEEE Trans. Energy Convers., vol. 24, no. 4, pp. 959,971, Dec. 2009.
S. Li, T. A. Haskew, and L. Xu, Conventional and novel control designs for direct driven PMSG wind turbines, Electric Power Syst. Res., vol. 80, no. 3, pp. 328¿338, Mar. 2010.
In-depth bibliography
R. Peña, J. C. Clare, and G. M. Asher, Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation, IEE Proc.-Electr. Power Appl., vol. 143, no. 3, pp. 231-241, May 1996.G. Abad, J. López, M. A. Rodríguez, L. Marroyo, and G. Iwanski, Doubly Fed Induction Machine: Modeling and Control for Wind Energy Generation. Hoboken, NJ: IEEE Press, 2011.
G. Tapia, Parke Eolikoek Sare Elektrikoarekin Trukaturiko Potentzia Erreaktiboaren Optimizaziorako Kontrol Estrategien Diseinu eta Garapena. Bilbo: Euskal Herriko Unibertsitateko Argitalpen Zerbitzua, 2004.
M. Chinchilla, S. Arnaltes, and J. Burgos, Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid, IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 130-135, Mar. 2006.
H.-W. Kim, S.-S. Kim, and H.-S. Ko, Modeling and control of PMSG-based variable-speed wind turbine, Electr. Power Syst. Res., vol. 80, no. 1, pp. 46-52, Jan. 2010.
D. Hansen and G. Michalke, Modelling and control of variable-speed multi-pole permanent magnet synchronous generator wind turbine, Wind Energy, vol. 11, no. 5, pp. 537-554, 2008.
Journals
IEEE Transactions on Energy ConversionIEEE Transactions on Industrial Electronics
IET Renewable Power Generation
IET Electric Power Applications
IEEE Transactions on Power Electronics
IEEE Transactions on Power Systems
Electric Power Systems Research
Energy Conversion and Management
Wind Energy
Links
http://en.wikipedia.org/wiki/Doubly_fed_electric_machinehttp://www.intechopen.com. Publicaciones científica de libre acceso