2025

Cantera MA
Estimation of longitudinal and transverse stiffness of hemp fibers and their composites using experimental material parameters and invariants
Polymer Composites (2025), 1–17

2024

I. Adarraga, U. Garitaonaindia, U. Oses, F. de Caso, F. Mujika
Analytical determination and numerical validation of the shear factor in annular sector cross sections
STRUCTURES (2024), 62: 106253

Cantera MA
New Insights into the Stiffness and Strength of Flax Composites from Tsai’s Modulus and the Area of the Failure Envelope
Fibers and Polymers (2024) 25,4921–4934

F. Mujika, P. Tsokanas, A. Arrese,  L.F.M. da Silva
Energy release rate in bimaterial specimens tested in pure modes I and II
ENGINEERING FRACTURE MECHANICS (2024), 301, 110012

2023

F. Mujika, P. Tsokanas, A. Arrese, P.S. Valvo, L.F.M. Da Silva
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens
ENGINEERING FRACTURE MECHANICS (2023), 290: 109454

F. Mujika, M. Olave, M.A. Cantera, U. Garitaonaindia, M. Isasa, A. Arrese
On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests
COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (2023), 175, 107802

2022

A. Arrese, F. Mujika, J. Renart, C. Sarrado.
Analysis of displacement path dependence in mixed mode cohesive law
ENGINEERING FRACTURE MECHANICS (2022), 276, 108879

2021

A. Boyano Murillo; J.M. López Guede; L. Torre Tojal; U. Fernández Gámiz; E. Zulueta; F. Mujika Garitano.
Delamination Fracture Behavior of Unidirectional Carbon ReinforcedComposites Applied to Wind Turbine Blades
MATERIALS (2021) 14 (3), 593 

A. Arrese, I. Adarraga, N. Insausti, J. Renart, C. Sarrado.
Mode II cohesive law extrapolation procedure of composite bonded joints
ENGINEERING FRACTURE MECHANICS (2021) 244, 107563

I. Adarraga, N. Insausti, J. De Gracia, U. Oses
Applicability of an experimental procedure applied to DCB tests in adhesive joints
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021), 107, 102843

2020

J.M. Romera Aguayo; N. Carbajal de la Red; F. Mujika Garitano
A simple analytical method for determining interlaminar shear stresses in symmetric laminates
STRUCTURES (2020) 25, 683 - 695

N. Insausti Irastorza; I. Adarraga Usabiaga; J. De Gracia Igelmo; A. Arrese Arratibel; F. Mujika Garitano
Numerical assessment of an experimental procedure applied to DCB tests
POLYMER TESTING (2020) 82 - 106288

N. Insausti Irastorza; I. Adarraga Usabiaga; N. Carbajal de la Red; F. Mujika Garitano
Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different
POLYMER TESTING (2020) 81 - 106154 

2019

A. Arrese Arratibel; N. Insausti Irastorza; F. Mujika Garitano; M. Pérez-Galmes; J. Renart
A novel experimental procedure to determine the cohesive law in ENF tests
COMPOSITES SCIENCE AND TECHNOLOGY (2019) 170, 42-50

2018

J. De Gracia Igelmo; A. Boyano Murillo; A. Arrese Arratibel; F. Mujika Garitano
Analysis of DCB test of angle-ply laminates including bending-twisting coupling
COMPOSITE STRUCTURES (2018) 190, 169-178

N. Insausti Irastorza; I. Adarraga Usabiaga; J. Urruzola Moreno; F. Mujika Garitano
Comparison between the stiffness method and the hybrid method applied to a circular ring
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018) 40, 44

R. Herrera, A. Arrese, P.L. de Hoyos-Martinez, J. Labidi, R. Llano-Ponte
Evolution of thermally modified wood properties exposed to natural and artificial weathering and its potential as an element for façades systems
CONSTRUCTION AND BUILDING MATERIALS (2018) 172, 233–242

J. De Gracia Igelmo; A. Boyano Murillo; A. Arrese Arratibel; F. Mujika Garitano
Analysis of the DCB test of angle-ply laminates including residual stresses
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018) 94, 197-204

2017

G. Vargas Silva; F. Mujika Garitano
Greenstick fracture in composite pultruded rods
COMPOSITES PART B: ENGINEERING (2017) 110, 106-115

A. Arrese Arratibel; A. Boyano Murillo; J. De Gracia Igelmo; F. Mujika Garitano
A novel procedure to determine the cohesive law in DCB tests
COMPOSITES SCIENCE AND TECHNOLOGY (2017) 152, 76-84

A. Boyano Murillo; J. De Gracia Igelmo; A. Arrese Arratibel; F. Mujika Garitano
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017) 87, 99-109

Cantera MA; Behrooz M; Gibson RF; Gordaninejad F
Modeling of magneto-mechanical response of magnetorheological elastomers (MRE) and MRE-based systems: A review
Smart Materials and Structures (2017) 26, 1-22

2016

A. Boyano Murillo; J. De Gracia Igelmo; A. Arrese Arratibel; F. Mujika Garitano
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness
ENGINEERING FRACTURE MECHANICS (2016) 163, 462-475

I. Adarraga Usabiaga; J.M. Romera Aguayo; M.A. Cantera López de Silanes; N. Insausti Irastorza; F. Mujika Garitano
Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites
JOURNAL OF COMPOSITE MATERIALS (2016) 50, 413-426

F. Mujika Garitano; A. Arrese Arratibel; I. Adarraga Usabiaga; U. Oses Orbegozo
New correction terms concerning three-point and four-point bending tests
POLYMER TESTING (2016) 55, 25-37

2015

J. De Gracia Igelmo; A. Boyano Murillo; A. Arrese Arratibel; F. Mujika Garitano
A new approach for determining the R-curve in DCB tests without optical measurements
ENGINEERING FRACTURE MECHANICS (2015) 135, 274-285

F. Mujika Garitano; M. Asensio; G. Vargas Silva; A. Boyano Murillo; J. De Gracia Igelmo
Analysis of a reversible five-point bending configuration based on a novel two-sense support
POLYMER TESTING (2015) 43, 108-122

A. Boyano Murillo; M.V. Mollón; J. Bonhomme; J. De Gracia Igelmo; A. Arrese Arratibel; F. Mujika Garitano
Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II
ENGINEERING FRACTURE MECHANICS (2015) 143, 63-79

G. Vargas Silva; J.A. Ramos; J. De Gracia Igelmo; J. Ibarretxe; F. Mujika Garitano.
In-plane shear behaviour of multiscale hybrid composites based on multiwall carbon nanotubes and long carbon fibres
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015) 34, 1926-1936

M.A. Cantera; J.M. Romera; I. Adarraga; F. Mujika
Modelling and Testing of the Snap-Through Process of Bi-Stable Cross-Ply Composites
COMPOSITE STRUCTURES (2015) 120, 41-52

U. Garitaonaindia; J.L. Alcaraz
Influence of a micro-thread at cervical position and a cylindrical intermediate zone on the mechanical behaviour of dental implants: A three-dimensional finite element analysis
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015) 229 (9) 670-680

2014

M.A. Cantera; J.M. Romera; I. Adarraga; F. Mujika
Modelling of [0/90] Laminates Subject to Thermal Effects Considering Mechanical Curvature and Through-the-Thickness Strain
COMPOSITE STRUCTURES (2014) 110, 77-87

I. Adarraga; M.A. Cantera; J.M. Romera; N. Insausti; F. Mujika
The Dual Integrated Force Method Applied to Unidirectional Composites
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2014) 98, 663-677

2013

J.M. Romera; M.A. Cantera; I. Adarraga; F. Mujika
A Top-Down Analytic Approach for the Analysis of Edge Effects of Angle-Ply Symmetric Laminates
COMPOSITE STRUCTURES (2013) 104, 60-70

V. Rodriguez; D. Fernandez; F. Mujika; J.M. Muñoz
Analysis of out-of-Plane Stresses in Sandwich Beams Subjected to Pure Bending with Large Deflections
JOURNAL OF COMPOSITE MATERIALS (2013) 47, 2809-2822

J.M. Romera; M.A. Cantera; I. Adarraga; F. Mujika
Application of the Submodeling Technique to the Analysis of the Edge Effects of Composite Laminates
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013) 32, 1099-1111

F. Mujika
Stress and Displacement Fields in Tensile Tests of Multidirectional Laminates with Flexible Clamped Ends
JOURNAL OF COMPOSITE MATERIALS (2013) 47, 3465-3484

2012

F. Mujika Garitano
A novel approach for the three-point flexure test of multidirectional laminates
JOURNAL OF COMPOSITE MATERIALS (2012) 46, 259-274

M.A. Cantera; J.M. Romera; I. Adarraga; F. Mujika
Hygrothermal Effects in Composites: Influence of Geometry and Determination of Transverse Coefficient of Thermal Expansion
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012) 31, 1270-1281

F. Mujika; G. Vargas; J. Ibarretxe; J. De Gracia; A. Arrese
Influence of the Modification with MWCNT on the Interlaminar Fracture Properties of Long Carbon Fiber Composites
COMPOSITES PART B-ENGINEERING (2012) 43(3), 1336-1340

2011

G. Vargas; F. Mujika
Determination of In-Plane Shear Properties by Three-Point Flexure Test of ±45° Anti-Symmetric Laminates
POLYMER TESTING (2011) 30, 204-215

N. Carbajal; F. Mujika
Determination of Transverse Compressive Strength of Long Fibre Composites by Three-Point Bending of [90(m)/0(n)] Cross-Ply Laminated Strips
POLYMER TESTING (2011) 30, 578-584

J.M. Romera; I. Adarraga; M.A. Cantera; F. Mujika
Numerical Analysis of Displacement and Stress Fields of Off-Axis Composites in Three-Point Flexure
JOURNAL OF COMPOSITE MATERIALS (2011) 45, 671-682

F. Mujika; J. Pujana; M. Olave
On the Determination of Out-of-Plane Elastic Properties of Honeycomb Sandwich Panels
POLYMER TESTING (2011) 30, 222-228

2010

A. Arrese; N. Carbajal; G. Vargas; F. Mujika
A New Method for Determining Mode II R-Curve by the End Notched Flexure Test
ENGINEERING FRACTURE MECHANICS (2010) 77, 51-70

G. Vargas; F. Mujika
Determination of In-Plane Shear Strength of Unidirectional Composite Materials Using the Off-Axis Three-Point Flexure and Off-Axis Tensile Tests
JOURNAL OF COMPOSITE MATERIALS (2010) 44, 2487-2507

2009

G. Vargas; A. Arrese; N. Carbajal; F. Mujika
Analysis of In-Plane and Out-of-Plane Thermo-Mechanical Stresses in Un-Symmetric Cross-Ply Curved Laminated Strips
JOURNAL OF COMPOSITE MATERIALS (2009) 43, 3157-3184

N. Carbajal; F. Mujika
Determination of Compressive Strength of Unidirectional Composites by Three-Point Bending Tests
POLYMER TESTING (2009) 28, 150-156

N. Carbajal; F. Mujika
Determination of Longitudinal Compressive Strength of Long Fiber Composites by Three-Point Bending of [0m/90n/0p] Cross-Ply Laminated Strips
POLYMER TESTING (2009) 28, 618-626

2008

N. Carbajal; G. Vargas; A. Arrese; F. Mujika
Analysis of Thermal Stresses in Unsymmetric Cross-ply Composite Strips
JOURNAL OF COMPOSITE MATERIALS (2008) 42, 1247-1266

A. Arrese; F. Mujika
Influence of Bending Rotations on Three and Four-Point Bend End Notched Flexure Tests
ENGINEERING FRACTURE MECHANICS (2008) 75, 4234-4246

2007

F. Mujika
On the Effect of Shear and Local Deformation in Three-Point Bending Tests
POLYMER TESTING (2007) 26, 869-877

2006

F. Mujika; N. Carbajal; A. Arrese; I. Mondragon
Determination of Tensile and Compressive Moduli by Flexural Tests
POLYMER TESTING (2006) 25, 766-771

F. Mujika
On the Difference Between Flexural Moduli Obtained by Three-Point and Four-Point Bending Tests
POLYMER TESTING (2006) 25, 214-220

2005

F. Mujika
New Considerations on the Stress Field in an Off-Axis Tensile Test
JOURNAL OF COMPOSITE MATERIALS (2005) 39, 1909-1929

F. Mujika; A. Valea; P. Gañan; I. Mondragon
Off-axis Flexure Test: A New Method for Obtaining In-plane Shear Properties
JOURNAL OF COMPOSITE MATERIALS (2005) 39, 953-980

2004

B. Fernández; A. Arbelaiz; A. Valea; F. Mujika; I. Mondragon
A Comparative Study on the Influence of Epoxy Sizing on the Mechanical Performance of Woven Carbon Fiber-Epoxy Composites
POLYMER COMPOSITES (2004) 25, 319-330

2003

G. Cantero; A. Arbelaiz; F. Mugika; A. Valea; I. Mondragon
Mechanical Behavior of Wood/Polypropylene Composites: Effects of Fibre Treatments and Ageing Processes
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2003) 22, 37-50

B. Fernández; F. Mujika; A. De Benito; I. Mondragon
Mechanical Characterization of Woven Carbon Fiber Composites with Poly(methylmethacrylate)-Modified Epoxy Matrices
POLYMER COMPOSITES (2003) 24, 640-654

F. Mujika; I. Mondragon
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part1: Analytical Approach
JOURNAL OF COMPOSITE MATERIALS (2003) 37, 1041-1066

F. Mujika; A. De Benito; I. Mondragon
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part II: Numerical and Experimental Results
JOURNAL OF COMPOSITE MATERIALS (2003) 37, 1191-1217

2002

F. Mujika; I. Mondragon; L. Berglund; J. Varna
45º Flexure Test for Measurement of In-Plane Shear Modulus
JOURNAL OF COMPOSITE MATERIALS (2002) 36, 2313-2337

F. Mujika; A. De Benito; B. Fernández; A. Vázquez; R. Llano Ponte; I. Mondragon
Mechanical Properties of Carbon Woven Reinforced Epoxy Matrix Composites. A Study on the Influence of Matrix Modification with Polysulfone
POLYMER COMPOSITES (2002) 23, 372-382

2001

M. Ormaetxea; J. Forcada; F. Mujika; A. Valea; M.D. Martin; C. Marieta; S. Goyanes; I. Mondragon
Ultimate Properties of Rubber and Core-Shell Modified Epoxy Matrices with Different Chain Flexibilities
JOURNAL OF MATERIALS SCIENCE (2001) 36, 845-852

Previous to 2000

F. Mujika; A. De Benito; M. Atxega; B. Fernández; M. Jauregi; P. Nieto; I. Mondragon
Comportamiento a Fractura Interlaminar en Materiales Composites de Matriz Epoxi Modificada
PLASTICOS MODERNOS (1998) 75, 247-249

I. Harysmendi; R. Miner; A. Valea; R. Llano Ponte; F. Mujika; I. Mondragon
Strain rate and Temperature Effects on the Mechanical Behavior of Epoxy Mixtures with Different Crosslink Densities
POLYMER (1997) 38, 5573-5577