Articles

1. J. CANALES, M E MUÑOZ, M. FERNÁNDEZ A. SANTAMARÍA "Rheology, electrical conductivity and crystallinity of a polyurethane/graphene composite: Implications for its use as a hot-melt adhesive" COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 84, 9-16 (2016).
2. E. RODRIGUEZ, M. FERNÁNDEZ, M E MUÑOZ, A. SANTAMARÍA. "The effect of pressure on the viscosity of two different nanocomposites based on a PS matrix: a case of piezorheological complexity" JOURNAL OF RHEOLOGY, 60, 199-210, (2016).
3. L. SANGRONIZ, J.K. PALACIOS, M. FERNÁNDEZ, A. SANTAMARIA et al. Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology European Polymer Journal, 83, 10-21, (2016).
4. S. PETISCO, J. FERNANDEZ, M.FERNANDEZ, A.SANTAMARIA, J.R. SARASUA, "The relevance of molecular weight in the design of amorphous biodegradable polymers with optimized shape memory effect", Journal of the Mechanical Behavior of Biomedical Materials, 61, 541-553, (2016).
5. SILVA, K. N.; NOVOA-CARBALLAL, R.; DRECHSLER, M.; MÜLLER, A. H. E.; PENOTT-CHANG, E. K., MÜLLER A. J. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016, 489, 311–321 (January). "The influence of concentration and pH on the structure and rheology of cationic surfactant/hydrotrope structured fluids" (SCI-207).
6. PALACIOS, J. K.; MUGICA, AGURTZANE; ZUBITUR, M.; ITURROSPE, A.; ARBE, A.; GUOMING, L.; WANG, D., ZHAO, J.; HADJICHRISTIDIS, N.; MÜLLER, A. J. RSC Advances, 2016, 6, 4739-4750 (January). "Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers" (SCI-208).
7. VERNÁEZ, O.; DAGREOU, S.; GRASSL, B.; MÜLLER, A. J. Journal of Polymer Science, Part B: Polymer Physics, 2016, 54, 433-444 (February). "Dynamic rheology and relaxation time spectra of oil-based self-degradable gels" (SCI-209).
8. LAREDO, E.; NEWMAN, D.; PEZZOLI, R.; MÜLLER, A. J.; BELLO, A. Journal of Polymer Science, Part B: Polymer Physics, 2016, 54, 680-691 (March). "A complete TSDC description of molecular mobilities in polylactide/starch blends from local to normal modes: Effect of composition, moisture and crystallinity" (SCI-210).
9. RIZZUTO, M.; MUGICA, A.; ZUBITUR, M.; CARETTI, D.; MÜLLER, A. J. CrystEngComm, 2016, 18, 2014-2023 (March). "Plasticization and anti-plasticization effects caused by poly(lactide-ran-caprolactone) addition to double crystalline poly(L-lactide)/poly(ε-caprolactone) blends" (SCI-211).
10. MÜLLER, A.J.; HU, W.; Progress in Polymer Science, 2016, 54-55, 1-2 (March-April). "The effects of confinement on polymeric thermal transitions and nanostructuring" (Introduction to a Special Volume of Prog Polym Sci guest edited by A.J. Müller and W. Hu.). (SCI-212).
11. MICHELL, R. M.; MÜLLER, A. J. Progress in Polymer Science, 2016, 54-55, 183-213 (March-April). "Confined Crystallization of Polymeric Materials" (SCI-213).
12. WOO, E. M.; LUGITO, G.; TSAI, J.-H.; MÜLLER A. J. Macromolecules, 2016, 49, 2698-2708 (April). "Hierarchically Diminishing Chirality Effects on Lamellar Assembly in Spherulites Comprising Chiral Polymers" (SCI-214).
13. MÜLLER, A. J.; MICHELL, R. M. (April 2016), pp. 72-99, "Chapter 5. Differential Scanning Calorimetry of Polymers", in Polymer Morphology: Principles, Characterization, and Processing (ed. Q. Guo), John Wiley & Sons, Inc, Hoboken, NJ, USA. DOI: 10.1002/9781118892756.ch5
14. MÜLLER, A. J.; MICHELL, R. M.; LORENZO, A. T. (April 2016), pp. 181-203, "Chapter 11. Isothermal Crystallization Kinetics of Polymers", in Polymer Morphology: Principles, Characterization, and Processing (ed. Q. Guo), John Wiley & Sons, Inc, Hoboken, NJ, USA. DOI: 10.1002/9781118892756.ch11
15. FIGUEROA, Y.; GUEVARA, M.; PÉREZ, A.; COVA, A.; SANDOVAL, A.; MÜLLER, A. J. Carbohydrate Polymers, 2016, 146, 231-237 (August). "Effect of sugar addition on glass transition temperatures of cassava starch with low to intermediate moisture contents" (SCI-215).
16. ARNAL, M. L.; BOISSÉ, S.; MÜLLER, A. J.; MEYER, F.; RAQUEZ, J.-M.; Dubois, Ph. CrystEngComm, 2016, 18, 3635-3649 (May). "Interplay Between Poly(Ethylene Oxide) and Poly (L-Lactide) Blocks During Diblock Copolymer Crystallization". (SCI-216).
17. LÓPEZ, J. V.; PÉREZ-CAMARGO, R. A.; ZHANG, B.; GRAYSON, S. M.; MÜLLER, A. J. RSC Advances, 2016, 6, 48049-48063 (May). "The Influence of Small Amounts of Linear Polycaprolactone Chains on the Crystallization of Cyclic Analogue Molecules" (SCI-217).
18. VEGA, J. F.; MÜLLER, A. J.; MARTÍNEZ-SALAZAR, J. European Polymer Journal, 2016, 80, 169-174 (July), "New habits in branched polyethylene single crystals" (SCI-218).
19. OYARZABAL, A.; MUGICA, A.; MÜLLER, A. J.; ZUBITUR, M.; Journal of  Applied  Polymer Science,  2016, 43648, 1-10 (July), "Hydrolytic degradation of nanocomposites based on poly(L-lactic acid) and layered double hydroxides modified with a model drug". (SCI-219).
20. GUMEDE, T. P.; LUYT, A. S.; PEREZ-CAMARGO, R. A.; ITURROSPE, A.; ARBE, A.; ZUBITUR, M.; MUGICA, A.,  MÜLLER, A. J.;  Journal of Polymer Science, Part B: Polymer Physics, 2016, 54, 1469–1482 (August), "Plasticization and Cocrystallization in LLDPE/Wax Blends". (SCI-220).
21. LI, Z.; WANG, J.; PÉREZ-CAMARGO, R.; MÜLLER, A. J.; ZHANG, B.; GRAYSON, S. M.; HU, W. Polymer International, 2016, 65, 1074-1079 (September),  "Non-monotonic molecular weight dependence of crystallization rates of linear and cyclic poly(epsilon-caprolactone)s in a wide temperature range". (SCI-221).
22. SANGRONIZ, L.; PALACIOS, J. K.; FERNÁNDEZ, M.; EGUIAZABAL, J. I.; SANTAMARIA, A.; MÜLLER, A. J. European Polymer Journal, 2016, 83, 10-21 (October), "Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology". (SCI-222).
23. SANZ, B.; BLASZCZYK-LEZAK, I.; MIJANGOS, C.; PALACIOS, J. K.; MÜLLER, A. J. Langmuir, 2016, 32, 7860−7865 (August), "New double-infiltration methodology to prepare PCL−PS core−shell nanocylinders inside anodic aluminum oxide templates".(SCI-223).
24. VERNÁEZ, O.; GARCÍA, A.; CASTILLO, F.; VENTRESCA, M. L.; MÜLLER, A. J. Journal of Petroleum Science and Engineering, 2016, 146, 874–882 (October), "Oil-based self-degradable gels as diverting agents for oil well operations". (SCI-224).
25. CAVALLO, D.; LORENZO, A. T.; MÜLLER, A. J. Journal of Polymer Science Part B: Polymer Physics, 2016, 54, 2200–2209 (November), "Probing the Stages of Thermal Fractionation by Successive Self-Nucleation and Annealing Performed with Fast Scanning Chip-Calorimetry". (SCI-225).
26. ARANDIA, I.; MUGICA, A.; ZUBITUR, M.; ITURROSPE, A.; ARBE, A.; LIU, G.; WANG, D.; MINCHEVA, R.; DUBOIS, PH.; MÜLLER, A. J. Journal of Polymer Science Part B: Polymer Physics, 2016, 54, 2346–2358 (November), "Application of SSA Thermal Fractionation and X-Ray Diffraction to Elucidate Comonomer Inclusion or Exclusion from the Crystalline Phases in Poly(butylene succinate-ran-butylene azelate) Random Copolymers" (SCI-226).
27. LIÉNARD, R.; ZALDUA, N.; JOSSE, T.; DE WINTER, J.; ZUBITUR, M.; MUGICA, A.; ITURROSPE, A.; ARBE, A.; COULEMBIER, O.; MÜLLER, A. J. Macromolecular Rapid Communications, 2016, 37, 1676−1681 (October), "Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(ε-caprolactone) and Poly(L(D)-lactide) (c(PCL-b- PL(D)LA))" (SCI-227).
28. FERNAŃDEZ-D'ARLAS, B.; BALKO, J.; BAUMANN, R. P.; PÖSELT, E.; DABBOUS, R.; ELING, B.; THURN-ALBRECHT, T.; MÜLLER, A. J. Macromolecules, 2016, 49, 7952−7964 (October), "Tailoring the Morphology and Melting Points of Segmented Thermoplastic Polyurethanes by Self-Nucleation" (SCI-228).
29. PALACIOS, J. K.; SANGRONIZ, A.; EGUIAZABAL, J. I.; ETXEBERRIA, A.; MÜLLER, A. J. European Polymer Journal, 2016, 85, 532–552 (December), "Tailoring the properties of PP/PA6 nanostructured blends by the addition of nanosilica and compatibilizer agents". (SCI-229).                                        
30. CHEN, H.; LIU, G.; QIN, Y.; MÜLLER, A. J.; HOU, J.; WANG, D. Macromolecules, 2016, 49, 8653-8660 (November), "Structural Transitions in Solution-Cast Films of a New AABB Type Thiophene Copolymer". (SCI-230).                  
31. ZALDUA, N.; MUJICA, A.; ZUBITUR, M.; ITURROSPE, A.; ARBE, A.; LO RE, G.; RAQUEZ, J. M.; DUBOIS, P.; MÜLLER, A. J. CrystEngComm, 2016, 18, 9334-9344 (December), "The role of PLLA-g-montmorillonite nanohybrids in the acceleration of the crystallization rate of a commercial PLA". (SCI-231).
32. FERNÁNDEZ-D'ARLAS, B.; MÜLLER A. J. Revista de Plásticos Modernos, 2016, 112, 718 (December). "Polímeros con alta densidad de puentes de hidrógeno".