International journals index
2023
- Cost-effectiveness and minimum requirements of nZEB for residential buildings under the new Spanish Technical Building Code Energy & Buildings, 2023; 287, Art. Number - 112986
- A mixed integer linear programming-based simple method for optimizing the design and operation of space heating and domestic hot water hybrid systems in residential buildings Energy Conversion and Management, 2023; 292, Art. Number - 117326
- How can cities effectively contribute towards decarbonisation targets? A downscaling method to assess the alignment of local energy plans with national strategies Energy Strategy Reviews, 2023; 49, Art. Number - 101137
- Multidimensional procedure for mapping and monitoring urban energy vulnerability at regional level using public data: Proposal and implementation into a case study in Spain Sustainable Cities and Society, 2023; 89, Art. Number - 104301
- Why district renovation is not leading the race? Critical assessment of building renovation potential under different intervention levels Energy & Buildings, 2023; 295, Art. Number - 113288
- A novel strategy to guarantee a minimum indoor temperature in social housing buildings Journal of Building Engineering, 2023; 76, Art. Number - 107230
- Overheating calculation methods, criteria, and indicators in European regulation for residential buildings Energy and Buildings, 2023; 292, Art. Number - 113170
- ‘Decarbonizing Europe’ A critical review on positive energy districts approaches Sustainable Cities and Society, 2023; 89, Art. Number - 104356
- Techno-economic analysis of a combined heat and power system integrating hybrid photovoltaic-thermal collectors, a Stirling engine and energy storage Energy Conversion and Management, 2023; 284, Art. Number - 116968
- Thermal characterization of a modular living wall for improved energy performance in buildings Building and Environment, 2023; 234, Art. Number - 110102
2022
- Experimental study on the influence of a conical cavity’s inclination angle and aspect ratio on thermal behavior of a cone cooled with nanofluid saturated porous media Experimental Heat Transfer, 2022
- Thermal state of a concentric quarter spherical enclosure subjected to air free convection Journal of Thermal Analysis and Calorimetry, 2022; 147 (5), 3703 - 3708
- Thermal state of a conical antenna cooled by means of nanofluid saturated porous media International Journal of Modern Physics C, 2022; 33 (1), Art. Number - 2250002
- Design of a Microscale Refrigeration System for Optimizing the Usable Space in Compact Refrigerators Energies, 2022; 12, Art. Number - 819
- Thermoeconomic analysis in advanced cogeneration systems in buildings. Frontiers in Energy Research, 2022; 9, Art. Number - 802971
- Development of a tool based on thermoeconomics to control and diagnosis building thermal facilities Energy, 2022; 239 (D), Art. Number - 122304
- Procedure for modelling and calibrating operating thermal systems in buildings Journal of Building Engineering, 2022; 45, Art. Number - 103530
- Can solar desalination be small and beautiful? A critical review of existing technology under the appropriate technology paradigm Energy Research & Social Science, 2022; 88, Art. Number - 102510
- A photovoltaic forced ventilated façade (PV-FVF) as heat source for a heat pump: Assessing its energetical profit in nZEB buildings Energy & Buildings, 2022; 261, Art. Number - 111979
- Overall uncertainty analysis of zonal indoor air temperature measurement in an in-use office building Building and Environment, 2022; Art. Number - 109123 - 0360-1323
- Performance analysis of a novel building integrated low concentration photovoltaic skylight with seasonal solar control Journal of Building Engineering, 2022; 54, Art. Number - 104687
- Experimental study on the thermal control of a roof-top collective building antenna using a porous matrix filled with Water-Copper nanofluid Case Studies in Thermal Engineering, 2022; 32, Art. Number - 101869 - 2214-157X
- Accounting for homeowners’ decisions to insulate: A discrete choice model approach in Spain Energy & Buildings, 2022; 273, Art. Number - 112417
- Assessing the Thermal Performance of a Conventional Architecture in Dry Warm Climate Recent Advances in Electrical Engineering, Electronics and Energy. CIT 2021. Lecture Notes in Electrical Engineering, 2022; 932, 47 - 58
- Methodology to Determine Energy Efficiency Strategies in Buildings Sited in Tropical Climatic Zones; Case Study, Buildings of the Tertiary Sector in the Dominican Republic Energies, 2022; 15(13), Art. Number - 4715
- Energy and thermal modelling of an office building to develop an artificial neural networks model Scientific Reports, 2022; 12, Art. Number - 8935
- Comparison between Energy Simulation and Monitoring Data in an Office Building Energies, 2022; 15, Art. Number - 239
- Numerical analysis of a combined heat pump ice energy storage system without solar benefit – Analytical validation and comparison with long term experimental data over one year Applied Thermal Engineering, 2022; 213, Art. Number - 118696
- Design of district heating networks in built environments using GIS: A case study in Vitoria-Gasteiz, Spain Journal of Cleaner Production, 2022; 349, Art. Number - 131491
- Data driven model for heat load prediction in buildings connected to District Heating by using smart heat meters Energy, 2022; 239, Art. Number - 122318
- Consideration of the interactions between the reaction zones in the New Extended Eddy Disspation Concept model Computer and Fluids, 2022; 233, Art. Number - 105203
- Engaging domestic users on demand response for heating cost reduction with a recommendation tool: Case study in Belgrade Energy Reports, 2022; 8 (3), 325 - 331
- Low-grade RC beams strengthened with TRM composite based on basalt, carbon and steel textiles: Experimental and analytical study Case Studies in Construction Materials, 2022; 16, Art. Number - e00906 - 2214-5095
- Defining the cooling and heating solar efficiency of a building skin component: application to a modular living wall Applied Thermal Engineering, 2022; 210, Art. Number - 118403
2021
- Modeling and simulation of a braking energy regeneration system in hydraulic hybrid vehicles in the Colombian topography Periodicals of Engineering and Natural Sciences, 2021; 9 (4), 755 - 766
- Industrial Waste Heat District-Heating Design Based on Geographic Information System: Case Study in Vitoria-Gasteiz (Spain) Journal of Physics: Conference Series, 2021; 2042, Art. Number - 012040
- Evaluation of the theoretical, technical and economic potential of industrial waste heat recovery in the Basque Country Journal of Cleaner Production, 2021; 312, Article number - 127494
—
20 Items per Page
2020
- Porous media to intensify natural convection in rectangular enclosures used in building techniques International Journal of Modern Physics (Q4), 2020; 31 (4), Art. Number - 2050061
- Enhancement of natural convection for improvement of Trombe wall performance. An experimental study Energy & Buildings, 2020; 211, Art. Number - 109788
- Control strategy optimization of a Stirling based residential hybrid system through multi-objective optimization Energy Conversion and Management, 2020; 208, Art. Number: - 112549
- Airtightness Analysis of the Built Heritage-Field Measurements of Nineteenth Century Buildings through Blower Door Tests Energies (Q3), 2020; 13(24), Art. Number - 6727
- Advanced Exergy Analysis in the Dynamic Framework for Assessing Building Thermal Systems Entropy, 2020; 22(1), 32 - 55
- Application of Thermoeconomics in HVAC Systems Applied Sciences, 2020; 10(12), Art. Number - 4163
- Overview and implementation of dynamic thermoeconomic & diagnosis analyses in HVAC&R systems Journal of Building Engineering (Q1), 2020; 32, Art. Number - 101429
- Dataset of an in-use tertiary building collected from a detailed 3D mobile monitoring system and building automation system for indoor and outdoor air temperature analysis Data in Brief (Q4), 2020; 31, Art. Number - 105907
- Experimental Devices to Investigate the Long-Term Stability of Phase Change Materials under Application Conditions Applied Sciences, 2020; 10(22), Art. Number - 7968
- Dynamical edge effect factor determination for building components thermal characterization under outdoor test conditions in a PASLINK test cell: A methodological proposal Energy & Buildings, 2020; 210
- Optimal design and operation of thermal energy storage systems in micro-cogeneration plants Applied Energy, 2020; 265, Art. Number - 114769
- Flexible dynamic model of PHEX for transient simulations in Matlab/Simulink using finite control volume method International Journal of Refrigeration, 2020; 110, 83 - 94
- European Cities in the Energy Transition: A Preliminary Analysis of 27 Cities Energies, 2020; 13(6)
- European Cities in the Energy Transition: A Preliminary Analysis of 27 Cities Energies (Q3), 2020; 13(6), Art. Number - 1315
- Energy efficiency optimisation in industrial processes: Integral decision support tool Energy (Q1), 2020; 191, Art. Number - 11648
- Analysis of the integration of micro-cogeneration units in space heating and domestic hot water plants Energy, 2020; 200, Art. number - 117584
- Modelling and experimental characterization of a Stirling engine-based domestic micro-CHP device Energy Conversion and Management, 2020; 225, Art. number - 113429
- Methodology for integrated modelling and impact assessment of city energy system scenarios Energy Strategy Reviews (Q2), 2020; 32, Art. number - 100553
- Estimation of the Heat Loss Coefficient of Two Occupied Residential Buildings through an Average Method Energies, 2020; 13 (21), Art Number - 5724
- A novel residential heating consumption characterisation approach at city level from available public data: Description and case study Energy & Buildings, 2020; Art. Number - 110082
- Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions Renewable Energy, 2020; 146, 384 - 396
- Simulation and Thermo-Energy Analysis of Building Types in the Dominican Republic to Evaluate and Introduce Energy Efficiency in the Envelope Energies (Q3), 2020; 13(14), Art. Number - 3731
- Cities4ZERO: Overcoming Carbon Lock-in in Municipalities through Smart Urban Transformation Processes Sustainability, 2020; 12 (9), Art. Number - 3590
- Dynamic behavior of humid granular avalanches: Optical measurements to characterize the precursor activity Physical Review E, 2020; 101, 022902-1 - 022902-12
- Feasibility of zonal space heating controls in residential buildings in temperate climates: Energy and economic potentials in Spain Energy & Buildings, 2020; 218, Art. number - 110006
- A Functional Data Analysis for Assessing the Impact of a Retrofitting in the Energy Performance of a Building Mathematics (Q1), 2020; 8(4), Art. Number - 547
- Numerical study of a turbulent co-axial non-premixed flame for methanol hydrothermal combustion: Comparison of the EDC and FGM models Journal of Supercritical Fluids, 2020; 169, Art Number - 105132
- New extended eddy dissipation concept model for flameless combustion in furnaces Combustion and Flame, 2020; 220, 49 - 62
- Energy, Environmental and Economic Analysis of Air-to-Air Heat Pumps as an Alternative to Heating Electrification in Europe Energies (Q3), 2020; 13(15), Art. Number - 3939
- Parametric characterization of a full-scale plate-based latent heat thermal energy storage system Applied Thermal Engineering, 2020; 178, Art Number - 115441 - 1359-4311
- Model calibration and exergoeconomic optimization with NSGA-II applied to a residential cogeneration Applied Thermal Engineering, 2020; 169, Art. number - 114916
- Cost-effective building renovation at district level combining energy efficiency & renewables – Methodology assessment proposed in IEA EBC Annex 75 and a demonstration case study Energy & Buildings, 2020; 224, Art. Number - 110280
2019
- Natural convective cooling of electronics contained in tilted hemispherical enclosure filled with a porous medium saturated by water-copper nanofluid International Journal of Numerical Methods for Heat and Fluid Flow, 2019; 29(1), 280 - 293
- Flat roof hygrothermal performance testing and evaluation International Journal of Building Pathology and Adaptation, 2019
- High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants Renewable Energy, 2019; 130, 902 - 909
- A novel thermoeconomic analysis under dynamic operating conditions for space heating and cooling systems Energy, 2019; 180, 819 - 837
- Vacuum insulation panels in construction solutions for energy efficient retrofitting of buildings. Two case studies in Spain and Sweden Energy and Buildings, 2019; 197, 131 - 139
- Dynamic neural networks to analyze the behavior of phase change materials embedded in building envelopes Applied Thermal Engineering, 2019; 158
- Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers Construction and Building Materials, 2019; 221, 586 - 594
- Numerical model for liquid-to-liquid heat pumps implementing switching mode Applied Thermal Engineering, 2019; 160
- Orientation-constrained system for lamp detection in buildings based on computer vision Sensors, 2019; 19 (7)
- Development and Experimental Validation of a New Off-Grid Thermoelectric Fancoil for Domestic Heating Journal of Electronic Materials, 2019; 48 (4), 1785 - 1794
- Mathematical development of an average method for estimating the reduction of the Heat Loss Coefficient of an energetically retrofitted occupied office building. Energy and Buildings, 2019; 192, 101 - 122
- Solar energy system for heating and domestic hot water supply by means of a heat pump coupled to a photovoltaic ventilated façade Solar Energy, 2019; 183, 453 - 462
- Energy characterization of a PASLINK test cell with a gravel covered roof using a novel methodology: Sensitivity analysis and Bayesian calibration Journal of Building Engineering, 2019; 22, 1 - 11
- An improved, generalized effective thermal conductivity method for rapid design of high temperature shell-and-tube latent heat thermal energy storage systems Renewable Energy, 2019; 132, 694 - 708
2018
- Thermal energy demand and potential energy savings in a Spanish surgical suite through calibrated simulations Energy and Buildings, 2018; 174, 513 - 526
- Environmental monitoring system based on an Open Source Platform and the Internet of Things for a building energy retrofit Automation in Construction, 2018; 87, 201 - 214
- A symbolic exergoeconomic study of a retrofitted heating and DHW facility Sustainable Energy Technologies and Assessments, 2018; 27, 119 - 133
- Rheology of Solar-Salt based nanofluids for concentrated solar power. Influence of the salt purity, nanoparticle concentration, temperature and rheometer geometry Solar Energy Materials and Solar Cells, 2018; 176, 357 - 373
- Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature Renewable and Sustainable Energy Reviews, 2018; 82, 3924 - 3945
- Monitoring System Analysis for Evaluating a Building’s Envelope Energy Performance through Estimation of Its Heat Loss Coefficient Sensors, 2018; 18(7)
- Optimal renovation of buildings towards the nearly Zero Energy Building standard Energy, 2018; 160, 1101 - 1114
- Dynamic simulation of a microcogeneration system in a Spanish cold climate. Energy Conversion and Management, 2018; 165, 206 - 218
- A novel correlation for the direct determination of the discharging time of plate-based latent heat thermal energy storage systems Applied Thermal Engineering, 2018; 129, 521 - 534
- Renewable Energy Cooperatives as an instrument towards the energy transition in Spain Energy Policy, 2018; 123, 215 - 229
- Effects of individual metering and charging of heating and domestic hot water on energy consumption of buildings in temperate climates Energy Conversion and Management, 2018; 171, 491 - 506 - 0196-8904
- Unglazed solar thermal systems for building integration, coupled with district heating systems. Conceptual definition, cost and performance assessment Journal of Facade Design and Engineering, 2018; 6 (2), 121 - 133
- Ventilation requirements based on carbon dioxide concentration criteria: implications on IAQ and energy use International Journal of Ventilation, 2018; 1 - 16
- Improvement of auxiliary BI-DRUM boiler operation by dynamic simulation Energy, 2018; 148, 676 - 686
- The error of neglecting natural convection in high temperature vertical shell-and-tube latent heat thermal energy storage systems Solar Energy, 2018; 174, 489 - 501
2017
- Thermal state of electronic assemblies applied to smart building equipped with QFN64 device subjected to natural convection Microelectronics Reliability, 2017; 70, 79 - 83
- Energy management in smart building with wire-bonded QFN64b electronic package subjected to air free convection. Experimental and numerical study Energy & Buildings, 2017; 149, 321 - 328
- Thermal design of a sensor for building control equipped with QFN electronic devices subjected to free convection. Effects of the encapsulating resin Energy & Buildings, 2017; 141, 218 - 225
- Effect of pH and lactose on cross-linking extension and structure of fish gelatin films Reactive and Functional Polymers, 2017; 117, 140 - 146
- A comparative analysis of two thermoeconomic diagnosis methodologies in a building heating and DHW facility Energy & Buildings, 2017; 146, 160 - 171
- Application of the malfunction thermoeconomic diagnosis to a dynamic heating and DHW facility for fault detection Energy & Buildings, 2017; 135, 385 - 397
- A precise method to measure the specific heat of solar salt-based nanofluids Journal of Thermal Analysis and Calorimetry, 2017; 129 (2), 905 - 914
- Energy conservation in an office building using an enhanced blind system control Energies, 2017; 10(2), 196 - 219
- A general model for the optimization of energy supply systems of buildings Energy, 2017; 138, 954 - 966
- A PC-tool to calculate the Moisture Buffer Value Energy Procedia, 2017; 133, 68 - 75
- Pore characterization of heterogeneous building materials: Pyroclastic arid-based concrete Journal of Building Physics, 2017; 41, 25 - 40
- Analysis of electrodeposition processes to obtain calcium phosphate layer on AZ31 alloy Surface and Coatings Technology, 2017; 319, 12 - 22
- Experimentation under real performing conditions of a highly integrable unglazed solar collector into a building façade Energy Procedia, 2017; 122, 775 - 780
- Overview and future challenges of nearly zero energy buildings (nZEB) design in Southern Europe Energy & Buildings, 2017; 155, 439 - 458
2016
- Cogeneration systems optimization: Comparison of multi-step and mixed integer linear programming approaches International Journal of Green Energy, 2016; 13, 256 - 266
- In-use office building energy characterization through basic monitoring and modelling Energy & Buildings, 2016; 119, 256 - 266
- Thermoeconomic Approach to the Diagnosis of A DHW Microcogeneration Plant Modern Environmental Science and Engineering, 2016; 2(8), 507 - 514
- Symbolic thermoeconomics in building energy supply systems Energy & Buildings, 2016; 127, 561 - 570
- The sodium nitrate–urea eutectic binary mixture as a phase change material for medium temperature thermal energy storage. Part II: Accelerated thermal cycling test and water uptake behavior of the material Solar Energy Materials and Solar Cells, 2016; 157, 1076 - 1083
- The sodium nitrate–urea binary mixture as a phase change material for medium temperature thermal energy storage. Part I: Determination of the phase diagram and main thermal properties Solar Energy Materials and Solar Cells, 2016; 157, 1065 - 1075
- Determination of the phase diagram and main thermophysical properties of the erythritol–urea eutectic mixture for its use as a phase change material Solar Energy Materials and Solar Cells, 2016; 157, 894 - 906
- The role of the design and operation of individual heating systems for the energy retrofits of residential buildings Energy Conversion and Management, 2016; 126, 736 - 747
- Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants Renewable Energy, 2018; 96, 120 - 136
- Finite cylinder-source model for energy pile heat exchangers: Effect of buried depth and heat load cyclic variations Applied Thermal Engineering, 2016; 96, 130 - 136
2015
- Optimizing full scale dynamic testing of building components: measurement sensors and monitoring systems Energy Procedia, 2015; 78, 1738 - 1743
- Encapsulated High Temperature PCM as Active Filler Material in a Thermocline-based Thermal Storage System Energy Procedia, 2015; 69, 937 - 946
- Energy performance of the opaque ventilated facade Energy Procedia, 2015; 78, 55 - 60
- Eutectic mixtures of sugar alcohols for thermal energy storage in the 50-90 ºC temperature range Solar Energy Materials and Solar Cells, 2015; 134, 215 - 226
- Characterization of wet granular avalanches in controlled relative humidity conditions Powder Technology, 2015; 279, 24 - 32
- Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation Energy, 2015; 84, 575 - 588
- Energy and economic assessment of the envelope retrofitting in residential buildings in Northern Spain Energy & Buildings, 2015; 86, 194 - 202
- Methodology for evaluating the energy renovation effects on the thermal performance of social housing buildings: Monitoring study and grey box model development Energy & Buildings, 2015; 102, 390 - 405
- Optimising test environment and test set up for characterizing actual thermal performance of building component and whole buildings Energy Procedia, 2015; 78, 3264 - 3269
- Analysis of the influence of the permeability of the envelope in the performance of different types of mechanical ventilation systems Energy Procedia, 2015; 78, 1263 - 1268
- Evaluation of green walls as a passive acoustic insulation system for buildings Applied Acoustics, 2015; 89, 46 - 56
2014
- Design of a Finned Plate Latent Heat Thermal Energy Storage System for Domestic Applications Energy Procedia, 2014; 48, 300 - 308
- A comparative study of the CFD modeling of a ventilated active façade including phase change materials Applied Energy, 2014; 126, 307 - 317
- Parametric study of the operational and economic feasibility of Stirling micro-cogeneration devices in Spain Applied Thermal Engineering, 2014; 71, 821 - 829
- Thermal analysis of closed feedwater heaters in nuclear power plants Applied Thermal Engineering, 2014; 68, 45 - 58
- Finite cylinder-source model for energy pile heat exchangers: Effects of thermal storage and vertical temperature variations Energy & Buildings, 2014; 78, 639 - 648
2013
- Development and comparative analysis of the modeling of an innovative finned-plate latent heat thermal energy storage system Energy, 2013; 58, 438 - 447
- Intercomparative tests on phase change materials characterisation with differential scanning calorimeter Applied Energy, 2013; 109, 415 - 420
- Experimental thermal characterization of radiant barriers for building insulation Energy & Buildings, 2013; 59, 62 - 72
- Ventilated active façades with PCM Applied Energy, 2013; 109, 530 - 537
- Field assessment of thermal behaviour of social housing apartaments in Bilbao, Northern Spain Energy & Buildings, 2013; 67, 118 - 135
- Dynamic exergy analysis of energy systems for a social dwelling and exergy based system improvement Energy & Buildings, 2013; 64, 359 - 371
2012
- Thermoeconomic analysis of a micro-CHP installation in a tertiary sector building through dynamic simulation Energy, 2012; 45, 228 - 236
- Influence of the experimental conditions on the subcooling of Glauber ́s salt when used as PCM Solar Energy Materials and Solar Cells, 2012; 102, 189 - 195
- Validation of heat transfer models for PCMs with a conductivimeter Energy Procedia, 2012; 30, 395 - 403
- Analysis of a thermal bridge in a guarded hot box testing facility Energy & Buildings, 2012; 50, 139 - 149
- Equivalent wall method for dynamic characterization of thermal bridges Energy & Buildings, 2012; 55, 704 - 714
- Heat transfer through a double-glazed unit with an internal louvered blind: Determination of the thermal transm ittance using a biquadratic equation International Journal of Heat and Mass Transfer, 2012; 55, 1226 - 1235
- Analysis of ventilation of dwellings in Spain in relation to Technical Building Code using tracer gas techniques International Journal of Ventilation, 2012; 11, 271 - 280
- A frecuency domain estimation of wall conduction tr ansfer function coefficients Energy & Buildings, 2012; 51, 191 - 202
- The exergy approach for evaluating and developing an energy system for a social dwelling Energy & Buildings, 2012; 55, 693 - 703
- Experimental investigation of demand controlled ventilation systems: a suitable alternative for con trolling ventilation in dwellings Journal of Energy and Power Engineering, 2012; 6, 1553 - 1559
2011
- Feasibility of small-scale gas engine-based residential cogeneration in Spain Energy Policy, 2011; 39, 3813 - 3821
- Implications of the modelling of stratified hot water storage tanks in the simulation of CHP plants Energy Conversion and Management, 2011; 52, 3018 - 3026
- Moisture buffering performance of a new pozolanic ceramic material: Influence of the film layer resistance Energy and Buildings, 2011; 43, 873 - 878
- Problems in the calculation of thermal bridges in dynamic conditions Energy and Buildings, 2011; 43 (2-3), 529 - 535
2009
- Corrosion behaviour of several aluminium alloys in contact with a thermal storage phase change material based on Glauber’s salt Corrosion Science, 2009; 51, 1263 - 1272
- Analysis of different models to estimate energy savings related to windows in residential buildings Energy and Buildings, 2009; 41, 687 - 695
2008
- Cogeneration technology for the metal-processing sector Applied Energy, 2008; 85, 516 - 567
- Moisture storage properties of multi-slotted light-weight ceramic blocks: Comparison between two manufacturers Journal of Building Physics, 2008; 40, 225 - 242
- Static and dynamic thermal characterisation of a hollow brick wall: Tests and numerical analysis Energy and Buildings, 2008; 40, 1513 - 1520
- One-dimensional solutions to Fourier’s equation and measures of heat transmission though walls Building and Environment, 2008; 43, 1433 - 1445
2007
- Characterization of moisture transport properties for lightened clay brick: Comparison between two manufacturers Journal of Building Physics, 2007; 31, 179 - 194
- Modelling and dynamic simulation of processes with ‘MATLAB’. An application of a natural gas installation in a power plant Energy, 2007; 32, 1271 - 1282
- Contribution of renewable energy sources to electricity production in the autonomous community of Navarre (Spain): A review Renewable and Sustainable Energy Reviews, 2007; 11, 1776 - 1793
- Contribution of renewable energy sources to electricity production in the La Rioja Autonomous Community, Spain. A review Renewable and Sustainable Energy Reviews, 2007; 11, 1244 - 1259
2006
- Optimising ventilation-system design for a container-housed engine Applied Energy, 2006; 83, 1125 - 1138
- Exergetic analysis and thermoeconomic study for a container-housed engine Applied Thermal Engineering, 2006; 26, 1840 - 1850
- Modelling and simulation of the dynamic performance of a natural-gas turbine flowmeter Applied Energy, 2006; 83, 1222 - 1234