Autonomous Paper Valves Using PDMS Vacuum Pumps as Actuators for Colorimetric Chrono-Samplin
- Authors:
- P. E. Guevara-Pantoja, F. Nicolas Nazar, I. Postigo, F. Benito-Lopez, L. Basabe-Desmonts
- Year:
- 2026
- Journal:
- Lab Chip
- Impact Factor:
- 6.3
- Quartile:
- 2025-(D1) Q1 JIF: 92,9% (BIOCHEMICAL RESEARCH METHODS)
- DOI:
- https://doi.org/10.1039/D6LC00389C
- Description:
-
Colorimetric sensors in paper-based microfluidic devices (μPADs) are promising for simple, single-use analytical applications. However, highly sensitive assays often require manual sample loading or active fluid manipulation, such as valving or time delays, which increases complexity and undermines the simplicity of μPADs. Here, we present an autonomous chrono-sampling μPAD integrating colorimetric sensors with paper-based valves actuated by passive PDMS vacuum pumps, designed for simplicity and ease of fabrication. The device incorporates a paper valve actuated by a vacuum pump consisting of an air-permeable PDMS layer. By modifying the channel geometry of the PDMS layer, the pump permeability was tuned, enabling precise control of valve actuation times via a thin polymeric membrane. The pump–membrane system was experimentally characterized and used to parameterize numerical simulations, allowing predictive optimization of device performance. As proof of concept, we demonstrate autonomous monitoring of culture medium pH at four successive time points separated by 45 minutes, with the temporal pH profile obtained from a single image acquired at the end of the experiment. This approach can be readily extended to other sampling intervals and sensor types, leveraging the inherent tunability of PDMS- based systems. Overall, this autonomous chrono-sampling platform enables low-cost, instrument-free, and temporally controlled assays, with potential applications in point-of-care diagnostics, cell culture, environmental monitoring, and time-resolved biochemical analyses